Atlia guide
Airbnb Turnovers in San Diego: What Happens Between Stays
What a proper Airbnb turnover cleaning in San Diego includes, from checkout walkthrough to damage report, and how pass-through-at-cost billing should read.

A proper Airbnb turnover in San Diego is six steps between checkout and the next check-in: a walkthrough with photos, cleaning and laundry, restocking, a working inspection, a final walkthrough, and a report to the owner with any damage or supply needs. If your turnovers skip steps or your invoices are vague about what you paid for, fix that first. This guide walks through each step so you can judge your turnovers against a standard, and read the supply and repair charges that follow.
Atlia is a full-service short-term rental management company that coordinates turnovers, cleaning and maintenance for San Diego owners at a flat 10% management fee, with repairs and supplies passed through at cost. The sections below explain what that looks like in practice.
A turnover is more than a clean: the six steps between checkout and the next check-in
A turnover is a reset to a fixed standard, and the clean is only one part of it. The six steps are: checkout walkthrough and photos, cleaning and laundry, restocking, inspection of systems and contents, a final walkthrough, and a report to the owner.
It is tempting to compress these into "the cleaner went in." That works until a lamp goes missing, a stain turns up two guests later, or the Wi-Fi was down for a weekend. Each step exists because it catches a different failure.
The test for any turnover process is simple. Could you point to a record of each step for the last stay? If the answer is a text saying "all done," the process is thinner than it looks.
Before the clean: checkout walkthrough, photos and left-behind items
The walkthrough comes before cleaning because cleaning destroys evidence. Once beds are stripped and surfaces wiped, visible damage and missing items are harder to prove.
A proper pre-clean pass covers three things. First, photograph anything damaged, stained or out of place before touching it. Second, check drawers, closets, under beds and the outdoor areas for guest belongings. Third, note low supplies so restocking is not a guess.
Left-behind items need a rule you set in advance: where they are logged, how the guest is notified, and how long you hold them. Someone should look every time, not only when a guest complains.
Cleaning, laundry and restocking: what gets reset to the same standard every time
Cleaning, laundry and restocking should produce an identical property for every arrival. Consistency is the standard, not effort.
Cleaning means stripping beds, washing or swapping linens and towels, sanitizing kitchen and bathrooms, wiping high-touch surfaces, emptying trash and recycling, and vacuuming or mopping floors. Restocking means bringing toilet paper, soap, toiletries, paper goods, trash bags and any host-provided coffee or welcome items back to the levels you set for the property.
Write those levels down. A restock standard that lives in one cleaner's head disappears when that cleaner is unavailable. A written list also tells you whether a supply charge on an invoice matches what the property actually uses.
Inspection and damage reporting: what gets documented, and why timing matters
Inspection is where a turnover stops being housekeeping and becomes asset protection. After the clean, someone should reset the space and confirm that lights, appliances, Wi-Fi, plumbing and locks work, set the thermostat, then do a final room-by-room check and photograph the finished rooms.
Timing matters because platforms set claim windows. Airbnb's host damage process asks for a reimbursement request through the Resolution Center within 14 days of the guest's checkout, with photos, receipts or repair estimates attached, and the guest then has 24 hours to respond. Airbnb's own terms reference a 30-day window for the payment request under Host Damage Protection, but don't rely on the longer number. Treat the shorter deadline as yours.
The practical rule: damage found at turnover is reported at turnover. Waiting for the next stay to "see if it matters" burns the window and muddies who caused it. If your current process finds damage a week later, it isn't inspecting.
How pass-through-at-cost billing works for supplies and repairs (and the questions to ask to read an invoice)
Pass-through at cost means the manager bills you what the supply or repair actually cost, with no markup added on top. Atlia works this way: a flat 10% management fee, and repairs and supplies passed through at cost.
That structure separates two things owners often blur together: the fee for management and the cost of goods. The management fee pays for the work of running the property. Supplies and repairs are real purchases and should appear as such.
When you read an invoice, ask these questions:
Is there a receipt or vendor invoice behind each supply and repair line?
Does the amount on the line match the amount on the receipt?
Are supplies itemized, or lumped into a "misc" charge?
Was the repair approved before the work started, and is the approval on record?
Does the restock quantity match what the written standard says the property uses?
Any line you can't trace to a receipt is a question to ask. Approvals matter most for repairs. You should see and approve non-routine work before it is billed, not discover it afterward.
Who is physically available in San Diego when a turnover goes wrong (and where the STRO local-contact role fits)
Turnovers go wrong at inconvenient moments: a late checkout collides with a same-day arrival, a guest gets locked out, a supply line bursts, a guest complains about the state of the unit. What matters is whether a person can physically reach the property.
San Diego's Short-Term Residential Occupancy rules include a local-contact role, and the City Treasurer's STRO page is the place to read what the city requires of hosts. The designation itself is the host's to make.
Atlia's staffed San Diego base covers that local-contact role and responds in person or by phone inside the one-hour window, included in the management rate. For an out-of-area owner, that means a person responding inside the hour rather than a problem waiting on a callback. If you're weighing options, the post on local vs national managers in San Diego covers the questions worth asking.
What an owner should see in the report after each turnover
The report is the proof the other five steps happened. After each turnover, an owner should be able to see a short completion note with photos of the finished rooms, any damage found with the pre-clean photos, missing or left-behind items, maintenance issues spotted during inspection, and restocking needs or supply purchases.
If something needs a decision, the report should say so and ask for approval rather than burying it in a monthly summary. Atlia's owner reporting is built around clear approvals, so you stay informed without carrying the daily work.
Try a quick self-check: read your last three turnover reports. If you can't tell from them what was cleaned, what was restocked, and whether anything was damaged, the reports aren't doing their job. For a wider look at whether management fits your situation, see whether Airbnb management is worth it for one San Diego property.
Hold your turnovers to a written standard, then ask Atlia to match it
Good turnover cleaning in San Diego is a repeatable process with a record at every step, and honest billing is a receipt behind every supply and repair line. Take the six steps and the invoice questions above and hold your current setup against them. If you want a San Diego team that coordinates turnovers and cleaning, bills supplies and repairs at cost under a flat 10% fee, and covers the local-contact role inside the one-hour window, contact Atlia and ask how it would run yours.
Frequently asked questions
Questions owners ask
What should an Airbnb turnover in San Diego include?
Six steps: a checkout walkthrough with photos, cleaning and laundry, restocking to set levels, an inspection of systems and contents, a final walkthrough with photos, and a report to the owner covering damage, missing items and supply needs. Atlia coordinates turnovers and cleaning between stays and reports back to owners with clear approvals.
What does pass-through-at-cost billing mean for Airbnb supplies and repairs?
It means the manager bills you what a supply or repair actually cost, with no markup. Atlia charges a flat 10% management fee and passes repairs and supplies through at cost. Ask for a receipt or vendor invoice behind each line, and confirm non-routine repairs were approved before the work happened.
How soon do I need to report guest damage to Airbnb?
Airbnb asks hosts to submit a damage reimbursement request through the Resolution Center within 14 days of checkout, with photos, receipts or repair estimates. Its terms also reference a 30-day window for the Host Damage Protection payment request, so use the shorter deadline. Documenting damage at turnover, before cleaning, keeps you inside it.
Who handles a San Diego STRO local-contact problem during a turnover?
The owner or property manager may be designated as the local contact, and the city requires a response to a reported complaint in person or by phone within one hour; details are on the City Treasurer's STRO page. Atlia's staffed San Diego base covers the local-contact role and responds inside that window, included in the management rate.